Vertical Glass Sandblasting Machine

Description of Glass Sandblasting Machine

Glass automatic sandblasting machine control by the PLC, suitable for processing 5-40mm thickness of flat glass to different kind of frosting patterns  . The transmission control by the photo switch and limit switch automatically. Glass conveys by the belt, and the guns driven by chain so that can be move up and down for sandblasting (the distance can be adjusted according to the  requirement). Stable transmission,  high efficiency and easy  maintenance of the chain system. There is a dust-proof cover for the bearing that is onto the drive structure is beneficial to the long period  normal  working  condition  and  daily  maintenance. Adopt  the  PLC  for  controlling. The  kinds  of equipment are with the function of stable running, large-scale function, easy operation and can be explore the glass position automatically when sandblasting.

Upgrade  transmission  by  frequency  conversion  control,  which  can  move  forward  or  backward  while sandblasting,  and with function  of  gradual  Change Sandblasting  Processing----Sandblasting  depth from shallow to deep.

Equipment characteristics of Vertical Glass Sandblasting Machine

• Control by PLC, easy to operate

• Adopting  stainless  steel  support  frame,  sturdy and stable, with long service life

• Glass  is transported  by  belt,  using  imported  or domestically produced high-quality belts.

• adopts red high quality rubber which is long life service time not easy to cause deformation.

• High  quality  spray  gun  and  nozzle,  with  long service  life.  Uniform  sand  production  and  good sandblasting effect.

• The   backing   is   a   special   black   brush   for sandblasting machine.

• Touch  screen  PLC  control,  using  Kunlun  state touch screen, software operation is simple, easy to use.

• Each  connection  switch  is  clearly  marked  and beautiful.

• Overall  packaging  to  avoid  loss  of  equipment components,    small    packaging    volume    and reduced freight.

  
  

  
  

  Technical parameters of Glass Processing Machine

• NO.	ITEM	BRAND
  1	PLC	Mitsubishi
  2	TOUCH SCREEN	MCGS
  3	ENCODER	Autonics
  4	PHOTOELECTRIC DETECTOR
  5	INTERMEDIATE RELAY	OMRON
  6	SPRAY GUN,TRANSMISSION STEPPER MOTOR1.8KW	BAISHAN MOTOR
  7	STEPPER MOTOR DRIVER (2 SET)
  8	SPRAY GUN, REDUCER	KEXUNDA
  9	TRANSFORMER	DELIXI
  10	CIRCUIT/ BREAKR/                    CONTACTOR/ THERMAL RELAY
  11	LOAD SWITCH	GLELE
  12	FOOT PEDAL	TAIWAN Tend
  13	TRAVEL SWITCH
  14	BLOWER 2.2KW	FOSHAN XIELI
  15	AIR HOSE	SHIQIU
  16	SYNCHRONOUS BELT	NO INTERCONNECTING TYPE
  17	SPRAY GUN	BORON CARBIDE